54Mbps WLAN Access Point, 802.11a+b/g, 2 radio transceivers
AW-6660 Wireless 11a+g/b Dual-Band Access Point can be accessed in all three 802.11 wireless networks. AW-6660 contains two separate wireless connectivity radio transceivers, which support all three popular wireless networking specifications. One of the two transceivers uses 2.4GHz frequency band and supports both wireless 802.11b and 802.11g, which offers up to 11Mbps and 108Mbps data rate respectively. The other transceiver uses 5GHz frequency band and supports wireless 802.11a, also at 54Mbps. Since two radio waves operate in different frequency bands, they can work simultaneously and cover your wireless zone with high-speed performance. In terms of security, AW-6660 offers up to 152-bit WEP Encryption. It also includes the MAC address filtering, which allows you to assign the Internet Access to those you want to. The configuration and installation is made to be simple and fast following the web browser-based setup wizard.

Frequency Band 5.18-5.32GHz, 5.5-5.7Ghz for 802.11a 2.412~ 2.483GHz ISM Band for 802.11b & g Radio Access Method CSMA/CA with ACK Modulation 802.11b: 11Mbps & 5.5Mbps CCK; 2Mbps: DQPSK; 1Mbps: BPSK 802.11g and 802.11a: OFDM Standards IEEE802.11a/b/g, IEEE802.1x, IEEE802.3, IEEE802.3u Operation Mode Point-to-Point, Point-to-Multipoint, Bridge, AP, Client, WDS and Repeater RF Output Power (antenna port) 2.4GHz up to 63mW (18dBm) and 5-5.8 GHz up to 63mW (18dBm) Antenna / Connector 2 RSMA Female Connectors, A and B/G Data Transfer Rate ( Signaling ) 802.11b: 11Mbps, 5.5Mbps, 2Mbps, 1Mbps, auto fallback 802.11g & 802.11a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps Receiver Sensitivity 802.11a: 6Mbps 10-5 BER @-88dBm; 54Mbps 10-5BER @ -67dBm 802.11g: 11 Mbps 10-5 BER @-80dBm; 54Mbps 10-5 BER @ -65dBm Network Interface One 10/100Mbps RJ-45 LAN Port Security up to 64/128/152 bit WEP, MAC Address filtering Configuration / Management Web-based configuration (HTTP) Firmware Upgrade Upgrade firmware via web-browser Supported protocols TCP/IP, IPX, NetBUI Power Supply 5 V/ 2.5A Temperature Range 0 ? 40 C operating, -20-70 C storing Dimension 180X158X26 mm (LxWxH) Weight 612gm w/o Antenna

54Mbps WLAN Access Point,802.11b/g, Ext. Antenna
Acting as a bridge between the wired Ethernet and the 2.4GHz IEEE 802.11g/b wireless LAN, this wireless LAN access point can let your wireless LAN client stations access both the wired and the wireless network nodes.

Frequency Band 2.412GHz~2.472GHz Modulation 11g Orthogonal Frequency Division Multiplexing (64QAM, 16QAM, QPSK, BPSK) 11b Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK) Standards IEEE802.11g/b Operation Mode AP, Bridge, Client, and WDS(repeater) mode RF Output Power (antenna port) 18dBm Antenna / Connector 2 dBi detachable Dipole Antenna Reversed SMA Connector Data Transfer Rate ( Signaling ) 54, 48, 36, 24, 18,11, 5.5, 2, 1 Mbps Network Interface 1 LAN port Security 64/128-bit 802.1x Radius Support Configuration / Management Web Management Firmware Upgrade Yes Power Supply DC12V Temperature Range Operating temperature: 0~60 Storage temperature: -20~65 Dimension 30(H)*127(W)*96(D) mm Weight 170 g

11Mbps WLAN Access Point, Ext. Antenna, 200mW
The Wireless Multi-Client Bridge/Access Point operates in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) wireless standard. It is the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation.

Frequency Band 2.400~2.484 GHz Modulation Direct Sequence Spread Spectrum (DSSS) 11 Mbps / 5.5 Mbps: CCK 2 Mbps: DQPSK 1 Mbps: DBPSK Standards IEEE802.11b, IEEE802.3, IEEE802.3u Power-over-Ethernet (IEEE 802.3af) Operation Mode Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge RF Output Power (antenna port) 200mW (23dBm) Antenna / Connector TNC Type (Female Reverse) Data Transfer Rate ( Signaling ) 1, 2, 5.5, 11 Mbps Receiver Sensitivity -94dBm @ 1Mbps -86dBm @ 11Mbps Network Interface One 10/100Mbps RJ-45 LAN Port Topology Ad-Hoc, Infrastructure IP configuration DHCP client/server Security MAC address filtering WEP encryption (64/128 bit) Hide SSID in beacons Layer 2 Isolation Configuration / Management Web-based configuration (HTTP) Firmware Upgrade Upgrade firmware via webbrowser Power Supply 12 V/ 1A Temperature Range Operating: -10?C to 45?C Storage: -40?Cto 70?C Dimension 125(L)mm * 108(W)mm * 31(H)mm 4.9 (L)in* 4.3(W)in * 1.2(H)in Weight 350 g (0.8 lb.)

54Mbps WLAN Access Point, 802.11b/g, 26dBm (400mW)
The Wireless Multi-Client Bridge/Access Point/ WDS (wireless distribution system) operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbps) wireless standards. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation. To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA. The MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Multi-Client Bridge/Access Point/WDS, you'll experience the best wireless connectivity available today.

Frequency Band 2.400-2.484 GHz Modulation (OFDM),DBPSK @ 1Mbps,DQPSK @2Mbps CCK @ 5.5 & 11Mbps,BPSK @ 6 and 9 Mbps QPSK @ 12 and 18Mbps,16-QAM @ 24 and 36 Mbps Standards IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u,Power-over-Ethernet (IEEE 802.3af) Operation Mode Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/ WDS RF Output Power (antenna port) 2.4GHz utp to 400mW (26dBm) Antenna / Connector TNC Type (Female Reverse) Data Transfer Rate ( Signaling ) 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps Receiver Sensitivity -94dBm @ 1Mbps, -92dBm @ 2Mbps, -89dBm @ 5.5Mbps, -86dBm @ 11Mbps, -92dBm @ 6Mbps,-90dBm @ 9Mbps, -88dBm @ 12Mbps, -86dBm @ 18Mbps,, -83dBm @ 24Mbps, -79dBm @ 36Mbps, -74dBm @ 48Mbps, -72dBm @ 54Mbps Network Interface One 10/100Mbps RJ-45 LAN Port Topology Ad-Hoc, Infrastructure IP configuration DHCP client/server Security IEEE802.1x Authenticator / RADIUS Client (EAP-MD5/TLS/TTLS) Support in AP Mode WPA2/ WPA/ Pre-share Key (PSK)/ AES/ TKIP MAC address filtering,Hide SSID in beacons Configuration / Management Web-based configuration (HTTP) Telnet configuration SNMP V1(MIBI, MIBII) Firmware Upgrade Upgrade firmware via web-browser Power Supply 12 V/ 1A Temperature Range Operating: -10?C to 45?C Storage: -40?Cto 70?C Dimension 125(L)mm * 108(W)mm * 31(H)mm Weight 350g

54Mbps WLAN Access Point, 802.11a/b/g
The Wireless High Power and High Gain Multi-Client Bridge/Access Point/ WDS (wireless distribution system) operates seamlessly in the dual band 2.4/5 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbps)/ 802.11a (5GHz, 54Mbps) wireless standards. ECB-8610 has high transmitted output power and high receivable sensitivity. High output power and high sensitivity can extend range and coverage to reduce the roaming between APs to get more stability wireless connection. It also can reduce the expense of equipment in the same environment. To protect your wireless connectivity, NCB-8610 can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA2/WPA/802.1x for powerful security authentication. The MAC addresses filter lets you select exactly which stations should have access to your network.

Frequency Band 2.400-2.484 GHz, 5-5.8 GHz Modulation (OFDM),DBPSK @ 1Mbps,DQPSK @2Mbps CCK @ 5.5 & 11Mbps,BPSK @ 6 and 9 Mbps QPSK @ 12 and 18Mbps,16-QAM @ 24 and 36 Mbps Standards IEEE802.11a/b/g, IEEE802.1x, IEEE802.3, IEEE802.3u,Power-over-Ethernet (IEEE 802.3af) Operation Mode Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/ WDS.3u,Power-over-Ethernet (IEEE 802.3af) RF Output Power (antenna port) 2.4GHz up to 400mW (26dBm) and 5-5.8 GHz up to 100mW (20dBm) Antenna / Connector TNC Type (Female Reverse) Data Transfer Rate ( Signaling ) 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps Receiver Sensitivity -94dBm @ 1Mbps, -92dBm @ 2Mbps, -89dBm @ 5.5Mbps, -86dBm @ 11Mbps, -92dBm @ 6Mbps,-90dBm @ 9Mbps, -88dBm @ 12Mbps, -86dBm @ 18Mbps,, -83dBm @ 24Mbps, -79dBm @ 36Mbps, -74dBm @ 48Mbps, -72dBm @ 54Mbps Network Interface One 10/100Mbps RJ-45 LAN Port Topology Ad-Hoc, Infrastructure IP configuration DHCP client/server Security IEEE802.1x Authenticator / RADIUS Client (EAP-MD5/TLS/TTLS) Support in AP Mode WPA2/ WPA/ Pre-share Key (PSK)/ AES/ TKIP MAC address filtering,Hide SSID in beacons Configuration / Management Web-based configuration (HTTP) Firmware Upgrade Upgrade firmware via web-browser Power Supply 12 V/ 1A Temperature Range Operating: -10?C to 45?C Storage: -40?Cto 70?C Dimension 125(L)mm * 108(W)mm * 31(H)mm Weight 350g

54Mbps WLAN Router, 4 port switch, 1 WAN port, Ext. antenna
Micronet SP916GK Wireless Broadband Router is a next generation Wireless LAN solution compliant with IEEE 802.11g standard which is almost five times faster than IEEE 802.11b products. The advanced functions like Dynamic DNS, virtual server and DMZ host endow users with more powerful management ability on the incoming and outgoing transactions. It is ideal for SOHO users to share Internet via wire or wireless connection.

Standard IEEE 802.3, 802.3u, 802.11, 802.11b and 802.11g WAN port 1, 10/100M LAN port 4, 10/100M Frequency band 2.4GHz Radio modulation OFDM/DSSS Data rate 54, 48, 36, 24, 18, 12, 9, 6M Output power 18dBm Antenna type Detachable, R-SMA Security 64(40)/128bit/152 WEP Encryption, 802.1x, WPA and access control list NAT Support NAT, UPnP, Dynamic DNS, virtual server, DHCP and DMZ host Power 12V DC, 1A

Wireless LAN Booster, 200mW, 802.11g, indoor

Frequensy band 2400 ? 2500MHz Transmit gain 12dB (Adjustable) Frequensy response +/- 1dB over operation range Output power 23dBm/200mW Receiver gain 14 dB typical Noise figure 3.5 dB typical Impedance 50 ohm Lightning protection Direct DC ground at antenna connector DC Surge protection at 5V DC input from transmission cable Power 6V DC Max. current<1A, 90-264V for AC adapter

Wireless LAN Booster, 500mW, 802.11g, indoor

Frequensy band 2.4 GHz Transmit gain 17 dB Frequensy response +/- 1dB over operation range Output power 27dBm/500mW Receiver gain 10 dB Noise figure 3.5 dB Impedance 50 ohm Lightning protection Direct DC ground at antenna connector DC Surge protection at 5V DC input from transmission cable Power 6V DC, 2A